Maintenance of Diaphragm-Girder Connections
Fatigue cracking at diaphragm-girder connections and at similar connections of cross-frames and floorbeams have been common in steel highway bridges for the past 20 or 30 years. Fatigue...

Effect of Column-to-Beam Strength Ratio on Seismic Performance of RC Moment Frames
Reinforced concrete (RC) moment frames are often used in building applications. During strong earthquake excitations, such buildings have been subject to soft-story or column sidesway...

The Effect of the Slab on Beam-Column Joint Behavior
The three-dimensional effect of slab interaction on frame behavior has been observed in lateral load tests on beam-column-slab elements....

Update of Serviceability Design Considerations for Low-Rise Steel Buildings
In 1990, the American Institute of Steel Construction published Servicability Design Considerations for Low-Rise Buildings by James M. Fisher and Michael A. West. This document was published...

Evolution of Composite Floor Systems in the United States
Composite floor systems, which combine structural steel beams with a cast-in-place concrete slab, have grown in popularity in the U.S. during the past 40 years. In most early applications,...

Cyclic Behavior of Three-Dimensional Partially-Restrained Composite Connections
This paper describes the test of a full-scale, bi-directional, PR composite beam-to-column connection. The PR connection consisted of continuous reinforcement bars across the column and...

Mile High Design
Denver's hybrid steel and concrete Invesco Field at Mile High, the National Football League's first design/build stadium, is on schedule to replace the existing...

Pushing Back
(Available on in special edition) The design for the $3.5-million Cameron Run tunnel rehabilitation project involved a tricky and relatively unproven method of pushing corrugated steel...

Sharp Curves
In Madison, Mississippi, just north of Jackson on Interstate 55, a diamond interchange with State Route 463 has become a bottleneck for commuters and local motorists. But the typical solution�a...

Competitive Edge
A new design system called the simplified economical bridge design (SEBD) makes steel cost-competitive with concrete for short- and medium-span bridges for the first time. In fact, a comparative...

Extended Life Span
The Harlem River Lift Span�part of New York City's Triborough Bridge System�was the largest vertical span in the country at the time of its construction in 1936. The lift...

High-Tech Inspection
The Federal Highway Administration's National Bridge Inspection Program requires the states to report the condition of its bridges as determined by visual inspection, and...

Native American Imprint
Following a design phase of more than four years, construction has finally begun on the Smithsonian Institution's National Museum of the American Indian, which will occupy...

Big Screen Debut
The Glenn-Colusa Irrigation District (GCID) encompasses nearly 150,000 acres (60,700 ha) of prime agricultural land in California's Sacramento Valley, generally considered...

Good Vibrations
As advances in material technology and structural efficiency find reflection in structures that are lighter, more slender, and more daring architecturally, design teams must focus more...

Raising the Bar of BART
Although it was originally designed to withstand a strong earthquake, and did so admirably in 1989, the Bay Area Transit (BART) system was recently evaluated to determine its ability to...

Guidelines for Inspection and Monitoring of In-Service Penstocks
This volume provides a guide to information and engineering techniques for inspection and monitoring of in-service penstocks. This guide covers penstocks constructed of steel, concrete,...

The Shape of Things to Come
High-performance steel (HPS) offers improved toughness and durability for bridge construction. This article presents several innovative concepts for HPS structural systems�including I-girders...

Walled In (Available in Geo-Environmental Special Issue only)
For more than 50 years manufacturing plants adjacent to the northeast bank of a midwestern creek produced asbestos-reinforced construction materials. When manufacturing at the plants ceased...

Keeping It Together
A new framing system for precast concrete columns and beams will allow tall buildings to withstand large earthquakes without damage to the structural integrity of the building. By using...

 

 

 

 

Return to search